Setting Guidelines - ABB REC670 Applications Manual

1MRK 511 401-UEN A
16.3.3
16.4
16.4.1
16.4.1.1
16.4.1.2
16.5
16.5.1
16.5.1.1
Bay control REC670 2.2 IEC
Application manual

Setting guidelines

Operation: On or Off
Logic for group alarm WRNCALH
Identification
Function description
Logic for group warning
Application
Group warning logic function WRNCALH is used to route warning signals to
LEDs and/or output contacts on the IED.
WRNCALH output signal WARNING and the physical outputs allows the user to
adapt the warning signal to physical tripping outputs according to the specific
application needs.
Setting guidelines
OperationOn or Off
Logic for group indication INDCALH
Identification
Function description
Logic for group indication
Application
Group indication logic function INDCALH is used to route indication signals to
different LEDs and/or output contacts on the IED.
INDCALH output signal IND and the physical outputs allows the user to adapt the
indication signal to physical outputs according to the specific application needs.
IEC 61850 IEC 60617
identification identification
WRNCALH -
IEC 61850 IEC 60617
identification identification
INDCALH -
Section 16
Logic
GUID-0BDD898A-360B-4443-A5CF-7619C80A17F4 v2
GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v4
ANSI/IEEE C37.2
device number
-
GUID-FC0DBB7B-FF86-44BF-83D6-DDF120A176DE v1
GUID-B08F2636-33DA-4937-92EB-1A8AC0909AB4 v2
GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v4
ANSI/IEEE C37.2
device number
-
GUID-9BAD30FB-4B75-4E14-82A8-6A59B09FA6EA v1
459