1MRK 511 401-UEN A
Section 3
3.1
3.1.1
3.1.1.1
Bay control REC670 2.2 IEC
Application manual
Configuration
Description of configuration REC670
Introduction
Description of configuration A30
The configuration of the IED is shown in Figure 2.
This configuration is used in single breaker arrangements with single or double
busbar.
Control, measuring and interlocking is fully configured.
The following should be noted. The configuration is made with the binary input
and binary output boards in the basic delivery. In many cases this is sufficient, in
other cases, for example with full control of all apparatuses included, more IO
cards are required. Our proposal for a full version with control is to use two binary
input modules and one binary output module.
Section 3
Configuration
IP14799-1 v2
IP14800-1 v1
M15200-3 v7
51