Networking (Amis); Paging - Office; Programmable Dial Actions; Reports - Toshiba Stratagy IVP8 Installation And Maintenance Manual

How Stratagy Operates
Feature Programming

Networking (AMIS)

System-wide Feature
An AMIS Analog protocol must be implemented on the other voice messaging system for AMIS
networking to function. If the networking feature is being used to network Stratagy with another
vendor's systems, planning and coordination between the two locations' Administrators is required
to create a workable numbering plan.
The feature defaults to disabled. To enable the feature, remove the comment sign ( ) and set the
amis_enabled to True. See
parameters.
Note
Paging – Office
Mailbox Feature
This feature is set using the Type field (Notify Menu) to RELAY. See
Examples

Programmable Dial Actions

Mailbox Feature
Enter the token programming sequence into the Extension field (Users Menu Options screen). The
default is usually the same as the User ID number, since users' ID numbers are often the same as
their telephone extension number.

Reports

System-wide Feature
See Chapter 10 – System Reports
automatic report, use the auto_report and auto_report_time parameters. Reports can be scheduled
in advance (24-hour format).

Ring Duration

Mailbox Feature
This feature defaults to four maximum rings per call. To reset this feature use the Maximum Rings
field (Users Menu Options screen). Valid entries are 1~9 and 0 (sets the ring duration to system
default).
This value can also be changed automatically at a certain time/day/date using the Auto (Scheduling)
Menu.

Screen Advertisement

System-wide Feature
This feature is enabled (defaults to five minutes). To change the setting, use the tmo_blank
parameter (valid entries are 1~99 min.) or to disable the feature set the parameter to 0.
Note
To program an advertisement or slogan (58-characters long) that displays instead of the blank
screen use the advertising parameter.
5-18
"amis_enabled" on page 9-4
Not supported on the Flash.
for examples on setting up a notification to a pager.
The screen saver activates only when the Main Menu is displayed.
for more instructions on setting the AMIS
for procedures on using the Report feature. To schedule an
Chapter 8 – Customization
Stratagy I&M 06/02