Toshiba Stratagy IVP8 Installation And Maintenance Manual page 135

Table 6-2 Options Screen Fields (continued)
DSS Port
(available only on IVP8
menu)
Use At Login
Gateway Box
AmisSysNumber
Stratagy I&M 06/02
This field is indicative of the button position of a DSS console with default programming.
Simply put, the IVP8 assumes that the programming of the DSS console is fixed and
cannot be changed. The IVP8 always identifies key 01 of the DSS console as port 000.
So if a port other than 000 is programmed under key 01, the DSS Port field for that
corresponding mailbox is "000."
Example
Let's say that a programmer has changed key 01 in Program 29 (Strata DK424i/DK424)
to provide BLF indication for port 023, and the extension associated for that port, which
by default is extension 223, has a corresponding mailbox in the IVP8. If the IVP8 is
expected to monitor busy activity for this extension, the DSS Port setting for Mailbox 223
would be "023."
Important!
If the dss_active parameter in the install.cfg file is set to false, this field is
disabled.
Possible values: 0~57, -1 disables feature
Default: -1
Whether Stratagy plays messages at the alternate rate when a user logs in.
Yes: Stratagy uses the alternate rate.
No: Stratagy uses the normal rate.
Possible values: Yes, No
Default: No
AMIS Options
AMIS information for the User ID mailbox.
Whether this User ID mailbox is an AMIS gateway.
Note The Flash does not support this feature.
Possible values: Yes, No
Default: No
Telephone number of the AMIS gateway box used to identify incoming AMIS calls. This
number is the same as to the identification number of a remote node.
Note The Flash does not support this feature.
Format: 1#area code#number
Example: 1#714#5551212
Menus
Users Menu
6-13