Toshiba Stratagy IVP8 Installation And Maintenance Manual page 83

Parameter
dtmf_dly
dtmf_gate
dtmf_on
error_box
future_delivery
gain_norm
Stratagy I&M 06/02
Controls the time between DTMF tones when Stratagy is dialing.
0: The time is country-dependent (50 ms in the US, 80 ms in the UK). This is
appropriate for almost all cases.
Possible values: 0, 3~19 (units of 10 ms)
Default: 0
Stratagy, before dialing any User ID Extension field, first verifies that DTMF was
entered since the call last accessed the User ID (usually Caller Instructions User ID
991) specified in the Done chain of the initial User ID (usually Company Greeting
User ID 990).
This "gate" prevents the transfer of a dead/phantom call to the Operator on those
switches that do not have disconnect supervision.
True: Stratagy gates by requesting the caller to "Say yes at the tone" to complete
the chain and transfer.
False: Stratagy does not complete the chain and transfer by requesting the caller
to "Say yes at the tone."
Note Regardless of this parameter setting, Stratagy does not perform the "gate"
action when the Extension field begins with @.
Possible values: true, false
Default: true
Controls length the system plays the DTMF tones.
Example: 20 is .2 sec (200 ms).
Possible values: 10, 20, ..., 90 (units of 10 ms)
Default: 20 (.2 sec)
Box that receives a notification if the system encounters a panic error on startup.
The notification runs when the system successfully recovers.
Possible values: valid User ID
Default: 999
Future delivery enables users to specify the time and/or date when a message is
delivered. When the messages are awaiting future delivery, they are stored in the
User ID specified in this parameter. Therefore, the Future Delivery User ID cannot
be used for any other purpose. The future delivery messages in this User ID cannot
be deleted or listened to by accessing this User ID mailbox. This User ID mailbox
cannot be accessed by a security code.
The originator of the future delivery message can delete or listen to the message
from his\her User ID, using the Future Delivery Review parameter of Play
Messages.
Possible values: valid User ID
Default: 995
Starting volume of the ports.
1. The ^( ) token enables you to change the volume of the current port to the
specified level (see Chapter 7 – Token
2. For the user, the current port volume can be set through the Users Menu's
Message Volume field and by the user with the Play Message Controls (see
Chapter 6 – Menus).
Possible values: -10, -9, ..., 0, ..., 4, 5
Default: 0
Description
Programming).
Configure Stratagy
System Parameters
IVP8 only
IVP8 only
4-19