Toshiba Stratagy IVP8 Installation And Maintenance Manual page 74

Configure Stratagy
Tools Utility
Table 4-3 Telephone System Integration Patterns – Definitions and Settings
Direct call
Integration strings that Stratagy should match for a Direct call.
***1eee
Example:
Forward from Ring No Answer
Integration strings that Stratagy should match for a forward from Ring No Answer.
#02#sss#rrr#
Example:
Forward from Busy
Integration strings that Stratagy should match for a forward from Busy.
#02#sss#bbb#
Example:
Modify Integration Patterns
1. From the Tools menu, press 4. The Telephone System Configuration screen displays.
2. From the Telephone System Configuration screen, press 2. The System Integration Patterns
screen displays.
3. From the System Integration Patterns screen, use the arrow keys (↑↓)
...or Page Up and Page Down to highlight the integration pattern parameter. Press Enter.
4. Modify the integration pattern using the line editor at the top of the screen.
5. After making the change(s), press ESC. The Telephone System Configuration screen displays.
6. From the Telephone System Configuration screen, press 1. The changes are transmitted to
Stratagy and Stratagy is shut down and restarted. By shutting down and restarting Stratagy, the
changes take effect.
...or 2.The changes are transmitted to Stratagy but Stratagy is not shut down or restarted. Until
you restart Stratagy, the changes do not take effect.
...or 3. The changes you made are cancelled and not saved.
7. If you pressed 1 to save the changes, press any key to reboot. The DOS prompt displays. To
continue, you must re-enter Stratagy Admin.
Remove an Integration Pattern
1. From the Tools menu, press 4. The Telephone System Configuration screen displays.
2. From the Telephone System Configuration screen, press 2. The System Integration Patterns
screen displays.
3. Use the arrow keys (↑↓), or Page Up and Page Down, to highlight the integration pattern
parameter. Press Enter.
4. Press Del or the spacebar when the integration pattern parameter displays in the line editor at
the top of the screen.
5. After making the change(s), press ESC. The Telephone System Configuration screen displays.
6. From the Telephone System Configuration screen, press 1. The changes are transmitted to
Stratagy and Stratagy is shut down and restarted. By shutting down and restarting Stratagy, the
changes take effect.
4-10
Parameter/Definitions
Stratagy I&M 06/02