Installation
Step 13: Program the Applications
Exclusive IVP8 Tokens
Tokens available exclusively for the IVP8 are:
•
– Enables a Stratagy Admin PC's modem to communicate with the IVP8 internal modem
KM
(2400 baud). This token is factory programmed in User ID 993.
Example: @KM
•
KT ( )
the DSS port is assigned in the "answering" mailbox, and the Night Transfer on the DSS
console is On.
Syntax: KT(XXX)G(YYY)
Night Transfer Alternate Routing
The
KT( )
DSS/BLF console's Night Transfer key in order to activate the
applications.
IVP8 cannot be programmed to monitor the Night Transfer key when programmed on a telephone
only DSS Console. However, a Night Key can be programmed on both a telephone and DSS
Console.
Program Example
The following is an example on how to program this feature. In this example, we use:
•
User ID: 900
•
User ID when Night Transfer is On: 901
•
User ID when Night Transfer is Off: 990
➤
To program the IVP8 for Night Transfer Alternate Routing
1. Define the Users record to contain:
2-16
– Directs calls to a designated User ID when DSS function is active (dss_active = true),
where:
Box number used when Night Transfer is On.
XXX
Box number used when Night Transfer is Off.
YYY
token is used by the Night Transfer Alternate Routing feature. The feature monitors the
User ID 900
Extension
@KT(901)G(990)
Do Not Disturb
OFF
Store Messages NO
DSS Port
port number
Note
Set this field to the first port of the PDKU card designated for DSS/BLF
console and defined by the console_slot_id parameter. If PDKU is in card slot
11, then DSS Port assignment is 0. Strata CTX/Strata DK assigns the first
port of the slot 64 card as a DSS "host" port.
KT( )
token for alternate routing
Stratagy I&M
06/02