Table of Contents
Advertisement
7.6
ATD><str> Mobile originated call from active memory using cor-
responding field
Syntax
Exec Command
ATD><str>[<mgsm>];
Response(s)
ERROR
+CME ERROR: <err>
If no dialtone (parameter ATX2 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
When TA returns to command mode after call release:
OK
If successfully connected:
OK
Reference(s)
V.250
Command Description
This command searches the active phonebook for a given string
The termination character ";" is mandatory since dialing from a phonebook is only supported for voice calls and
for sending *# codes of Supplementary Services or other functions.
Parameter Description
(str)(+CSCS)
<str>
String type value ("x"), which should equal an alphanumeric field in at least one phonebook entry in the searched
memories; used character set should be the one selected with AT+CSCS.
as described in chapter
must be wrapped in quotation marks (""), if escape sequences or parameter
<str>
alphanumeric strings contains a blank. If not, quotation marks are optional.
If
is set to "UCS2", with respect to the coding of UCS2-characters only phonebook entries that contain
AT+CSCS
an alphanumeric string with as size less than the half of the parameter
dialed.
(str)
<mgsm>
String of GSM modifiers:
I
Activates CLIR (disables presentation of own phone number to called party)
i
Deactivates CLIR (enables presentation of own phone number to called party)
Notes
•
This command may be aborted generally by receiving a character during execution. Abortion is not possible
during some states of connection setup such as handshaking.
•
The command is not applicable to data calls. Any attempt to dial
result code "NO CARRIER" to appear.
•
Parameter
only if no *# code is within the dialing string.
<mgsm>
MC55_ATC_V04.00
Confidential / Released
"Supported character
Page 133 of 475
PIN
ASC0 ASC1
MUX1
%
%
§
%
and dials the assigned phone number.
<str>
<str>
sets".
<tlength>
<str>
MUX2
MUX3 Charge
§
§
!
!
can contain escape sequences
are used or if the
<mgsm>
from
AT+CPBW
without semicolon ";" causes the
Last
!
can be
3/17/06
Advertisement
Table of Contents
