At+Clip Calling Line Identification Presentation - Siemens Brodersen MC55 AT Command Manual

9.9

AT+CLIP Calling Line Identification Presentation

This command refers to the GSM supplementary service CLIP (Calling Line Identification Presentation) that
enables a called subscriber to get the calling line identity (CLI) of the calling party when receiving a mobile ter-
minated call.
The write command enables or disables the presentation of the CLI at the TE. It has no effect on the
AT+CLIP
execution of the supplementary service CLIP in the network.
The read command gives the status of <n>, and also triggers an interrogation of the provision status
AT+CLIP
of the CLIP service according to GSM 02.81 (given in <m>). If no SIM card is available or the SIM-PIN is not
entered, the command response is "ERROR".
Syntax
Test Command
AT+CLIP=?
Response(s)
+CLIP: (list of supported<n>s)
OK
Read Command
AT+CLIP?
Response(s)
+CLIP: <n>, <m>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CLIP=<n>
Response(s)
OK
ERROR
+CME ERROR: <err>
Reference(s)
GSM 07.07, GSM 02.81
Unsolicited Result Codes
URC 1
Voice call response format:
+CLIP: <number>, <type>, , [, <alpha>][,
URC 2
Data/FAX call response format:
+CLIP: <number>,
When CLIP is enabled at the TE (and is permitted by the calling subscriber), this URC is delivered after every
"RING" or "+CRING" URC when a mobile terminated call occurs.
Parameter Description
(num)(&W)(&V)
<n>
(&F)
[0]
1
MC55_ATC_V04.00
Confidential / Released
<type>
Suppress unsolicited result codes
Display unsolicited result codes
Page 208 of 475
PIN ASC0 ASC1 MUX1
§ % % %
<CLI validity>]
MUX2 MUX3 Charge
% % ! !
Last
!
3/17/06