Http Get (Polling Mode) - Siemens Brodersen MC55 AT Command Manual

at^sisi?
^SISI: 1,6,0,180,0,0
OK
at^sise=1
^SISE: 1,0
OK
at^sisc=1
OK
10.11.15

HTTP GET (Polling Mode)

at^siss=0,srvType,"Http"
OK
at^siss=0,conId,1
OK
at^siss=0,hcMethod,0
OK
at^siss=0,address,http://192.168.1.4/
OK
at^siso=0
OK
at^sisr=0,1500
^SISR: 0, 1264
...DATA...
OK
at^sisr=0,1500
^SISR: 0, 1500
...DATA...
OK
at^sisr=0,1500
^SISR: 0, 602
...DATA...
OK
at^sisr=0,1500
^SISR: 0, -2
OK
at^sisi?
^SISI: 0,6,0,3366,0,0
OK
at^sise=0
^SISE: 0,0
OK
at^sisc=0
OK
MC55_ATC_V04.00
Confidential / Released
The command response indicates that HTTP service
is in state "6" (Down) and that 180 bytes have been
sent.
Check error status of service profile 1.
The command response confirms that no error
occurred.
Close the service.
Select service type HTTP.
Select connection profile 1.
Start reading data in polling mode.
Again, try to read 1500 bytes.
Nor more data to read, i.e. the service has finished.
The command response indicates that the HTTP
service is in state "6" (Down) and that 3366 bytes
have been read.
Check error status of service profile 0.
The command response confirms that no error
occurred.
Close the service.
Page 265 of 475 3/17/06