Atq Set Result Code Presentation Mode - Siemens Brodersen MC55 AT Command Manual

2.4

ATQ Set result code presentation mode

This parameter setting determines whether or not the TA transmits any result code to the TE. Information text
transmitted in response is not affected by this setting.
Syntax
Exec Command
ATQ[<n>]
Response(s)
If <n>=0:
OK
If <n>=1:
(none)
Reference(s)
V.250
Parameter Description
(num)(&W)(&V)
<n>
(&F)
[0]
1
MC55_ATC_V04.00
Confidential / Released
PIN
!
DCE transmits result code
Result codes are suppressed and not transmitted
Page 33 of 475
ASC0 ASC1 MUX1 MUX2
% % % %
MUX3 Charge Last
% ! ! !
3/17/06