12.2
AT+FBADLIN Bad Line Threshold
This command defines the Copy-Quality-OK-threshold. If
in normal resolution (98 dpi) mode, then the copy quality is unacceptable. If
pixel count errors in fine resolution (196 dpi) mode, then the copy quality is unacceptable. "Copy Quality Not OK"
occurs if either the error percentage is too high or too many consecutive lines contain errors. A value of 0 implies
that error checking is not present or disabled.
Syntax
Read Command
AT+FBADLIN?
Response(s)
<badlin>
OK
Write Command
AT+FBADLIN=<badlin>
Response(s)
OK
If error is related to ME functionality
ERROR
Reference(s)
EIA PN-2388
Parameter Description
(num)
<badlin>
Bad lines
(P)
0...10
...255
Note
•
Used for Fax Class 2 only.
MC55_ATC_V04.00
Confidential / Released
consecutive lines have pixel count errors
<badlin>
PIN
ASC0 ASC1
!
%
!
Page 304 of 475
* 2 consecutive lines have
<badlin>
MUX1
MUX2
MUX3 Charge
%
!
!
!
Last
!
!
3/17/06