Table of Contents
Advertisement
2.
Configuration Commands
The AT Commands described in this chapter allow the external application to determine the MC55's behaviour
under various conditions.
2.1
AT&F Set all current parameters to manufacturer defaults
sets all current parameters to the manufacturer defined profile. All defined GPRS contexts which are not
AT&F
activated or not online will be undefined (see AT+CGDCONT).
Syntax
Exec Command
AT&F[<value>]
Response(s)
OK
Reference(s)
V.250
Parameter Description
(num)
<value>
[0]
Notes
•
List of parameters reset to manufacturer default can be found in Section 20.6,
tings Restorable with
•
In addition to the default profile, you can store an individual one with AT&W. To alternate between the two pro-
files enter either
ATZ
•
Every ongoing or incoming call will be terminated.
MC55_ATC_V04.00
Confidential / Released
Set all TA parameters to manufacturer defaults
AT&F.
(loads user profile) or
AT&F
Page 29 of 475
PIN
ASC0 ASC1
MUX1
!
%
%
%
(restores factory profile).
MUX2
MUX3 Charge
%
%
!
!
Factory Default Set-
Last
!
3/17/06
Advertisement
Table of Contents
