Table of Contents
Advertisement
at^sisc=9
OK
10.11.11
Configuring POP3 Service Profile
First set up a connection profile as explained in Section
which are mandatory for a GPRS profile. The example uses the connection profile ID 1 and the service profile
ID 1. The service profile is set up to retrieve a specific email (email number 2).
at^siss=1,srvType,"Pop3"
OK
at^siss=1,conId,"1"
OK
at^siss=1,address,"192.168.1.2"
OK
at^siss=1,user,"subscriber1"
OK
at^siss=1,passwd,"subscr1"
OK
at^siss=1,pCmd,"3"
OK
at^siss=1,pNumber,"2"
OK
at^siss?
^SISS: 0, "srvType", ""
^SISS: 1, "srvType", "Pop3"
^SISS: 1, "conId", "1"
^SISS: 1, "alphabet", "0"
^SISS: 1, "address", "192.168.1.2"
^SISS: 1, "user", "subscriber1"
^SISS: 1, "passwd", "*******"
^SISS: 1, "pCmd", "3"
^SISS: 1, "tcPort", "110"
^SISS: 1, "pNumber", "2"
^SISS: 1, "pLength", "0"
^SISS: 1, "pDelFlag", "0"
^SISS: 1, "tcpMR", "10"
^SISS: 1, "tcpOT", "6000"
^SISS: 2, "srvType", ""
^SISS: 3, "srvType", ""
^SISS: 4, "srvType", ""
^SISS: 6, "srvType", ""
^SISS: 7, "srvType", ""
^SISS: 8, "srvType", ""
^SISS: 9, "srvType", ""
OK
10.11.12
Retrieving Email (URC Mode)
This example uses the service profile described in Section 10.11.11.
MC55_ATC_V04.00
Confidential / Released
Close the service.
10.1.1
or Section 10.1.2. Enter at least all parameters
Select service type POP3.
Select connection profile 1.
Specify POP3 server address.
Specify recipient's mailbox name.
Password used by recipient for authentication to
POP3 server.
Command used to retrieve emails.
Email message number 2 shall be retrieved.
To check the profile enter the
mand. The response includes the values of all 10
connection profiles. Service profile 1 contains the
values specified above and the values automatically
assumed by default.
Default: Character set enabled with
be used.
Default: TCP port number commonly used for POP3.
Default: Message size shall not be limited.
Default: Retrieved message shall not be deleted on
POP3 server.
Default: Number of retransmission attempts for TCP
packets is 10 (= default of AT^SCFG).
Default: Timeout before closing outstanding TCP
connection is 6000 sec (= default of AT^SCFG).
Page 262 of 475
read com-
AT^SISS
shall
AT+CSCS
3/17/06
Advertisement
Table of Contents
