At^snfd Set Audio Parameters To Manufacturer Default Values - Siemens Brodersen MC55 AT Command Manual

17.10

AT^SNFD Set audio parameters to manufacturer default values

sets the active audio parameters to manufacturer defined default values.
AT^SNFD
The restored values are:
AT^SNFA: <atten>
AT^SNFI: <inBbcGain>,
AT^SNFO: <outBbcGain>, <outCalibrate>[0 to 4],
AT^SAIC: <io>, <mic>,
AT^SNFS: <audMode>
Syntax
Test Command
AT^SNFD=?
Response(s)
OK
Exec Command
AT^SNFD
Response(s)
OK
Reference(s)
SIEMENS
Note
• Remember that the factory set audio mode 1 is fixed to <outStep>=4. Consequently,
together with <outStep>=4, but does not affect the values of
<audMode>
audio modes 2 - 6. This means, if <audMode>=1, the read commands AT^SNFO,
always deliver <outStep>=4. In all other modes the
MC55_ATC_V04.00
Confidential / Released
<inCalibrate>
<ep>
Page 411 of 475
<sideTone>
PIN ASC0 ASC1 MUX1
! % % %
value is retained until explicitly changed.
<outStep>
MUX2 MUX3 Charge
% % ! !
AT^SNFD
currently selected in
<outStep>
and
AT^SNFV AT+CLVL
Last
!
restores
will
3/17/06