Table of Contents
Advertisement
9.11
AT+COLP Connected Line Identification Presentation
This command refers to the GSM supplementary service COLP (Connected Line Identification Presentation) that
enables a calling subscriber to get the connected line identity (COL) of the called party after setting up a mobile
originated call. The command enables or disables the presentation of the COL at the TE. It has no effect on the
execution of the supplementary service COLR in the network.
Syntax
Test Command
AT+COLP=?
Response(s)
+COLP:(list of supported <n>s)
OK
Read Command
AT+COLP?
Response(s)
+COLP: <n>,
<m>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+COLP=[<n>]
Response(s)
OK
ERROR
+CME ERROR: <err>
Reference(s)
GSM 07.07
Unsolicited Result Code
Call response format:
+COLP: <number>,
<type>
Parameter Description
(num)
<n>
0
1
(num)
<m>
0
1
2
(str)
<number>
String type phone number of connected address in format specified by
MC55_ATC_V04.00
Confidential / Released
PIN
%
Disable - suppress unsolicited result codes
Enable - display unsolicited result codes
COLP not provisioned (no presentation)
COLP provisioned
Unknown
Page 211 of 475
ASC0 ASC1
MUX1
MUX2
%
%
%
%
<type>
MUX3 Charge
Last
%
!
!
!
3/17/06
Advertisement
Table of Contents
