Combining At Commands On The Same Command Line - Siemens Brodersen MC55 AT Command Manual

1.4.2

Combining AT commands on the same command line

You may enter several AT commands on the same line. This eliminates the need to type the "AT" or "at" prefix
before each command. Instead, it is only needed once at the beginning of the command line. Use a semicolon
as command delimiter.
The table below lists the AT commands you cannot enter together with other commands on the same line. Oth-
erwise, the responses may not be in the expected order.
AT command type
V.250 commands
GSM 7.07 commands
GSM 7.05 commands (SMS)
Commands starting with AT&
AT+IPR
Note: When concatenating AT commands please keep in mind that the sequence of processing may be different
from the sequential order of command input. Therefore, if the consecutive order of the issued commands and
the associated responses is your concern, avoid concatenating commands on the same line.
MC55_ATC_V04.00
Confidential / Released
Comment
with FAX commands (Prefix AT+F)
with Siemens commands, Prefix AT^S)
To be used standalone
To be used standalone
To be used standalone
Page 18 of 475 3/17/06