At&V Display Current Configuration - Siemens Brodersen MC55 AT Command Manual

2.2 AT&V Display current configuration
returns the current parameter setting. The configuration varies depending on whether or not PIN authen-
AT&V
tication has been done and whether or not Multiplex mode is enabled (see AT+CMUX).
Syntax
Exec Command
AT&V[<value>]
Response(s)
ACTIVE PROFILE:
... (see Section 2.2.1, AT&V
OK
Reference(s)
V.250
Parameter Description
(num)
<value>
[0]
Notes
• The parameters of
AT^SMGO
fully for the first time. Reading starts after successful SIM authentication has been performed, and may take
up to 30 seconds depending on the SIM used. While the read process is in progress, an attempt to read the
parameter will result in empty values.
• The parameter of
AT+CSDH
MC55_ATC_V04.00
Confidential / Released
responses)
PIN
!
Profile number
can only be displayed after the SMS data from the SIM have been read success-
will only be displayed in SMS PDU mode, see AT+CMGF.
Page 30 of 475
ASC0 ASC1 MUX1 MUX2
% § % §
MUX3 Charge Last
§ ! ! !
3/17/06