At+Cbst Select Bearer Service Type - Siemens Brodersen MC55 AT Command Manual

7.18

AT+CBST Select bearer service type

The write command selects the bearer service <name>, the data rate
AT+CBST
element to be used when data calls are originated. The settings also apply to mobile terminated data calls,
<ce>
especially when single numbering scheme calls or calls from analog devices are received (see AT+CSNS). See
GSM 02.02[1] for a list of allowed combinations of subparameters.
Syntax
Test Command
AT+CBST=?
Response(s)
+CBST: (list of supported<speed>s), (list of supported<name>s), (list of supported<ce>s)
OK
Read Command
AT+CBST?
Response(s)
+CBST: <speed>, <name>,
OK
Write Command
AT+CBST=<speed>[, <name>[, <ce>]]
Response(s)
OK
ERROR
Reference(s)
GSM 07.07
Parameter Description
(num)(&W)(&V)
<speed>
0
4
6
(&F)
[7]
14
68
70
71
75
(num)(&W)
<name>
(&F)
0
(num)(&W)
<ce>
Transparent mode is not supported.
(&F)
1
MC55_ATC_V04.00
Confidential / Released
<ce>
PIN
!
Autobauding
2400 bps (V.22bis)
4800 bps (V.32)
9600 bps (V.32)
14400 bps (V.34)
2400 bps (V.110)
4800 bps (V.110)
9600 bps (V.110)
14400 bps (V.110)
Asynchronous modem
Non-transparent
Page 145 of 475
<speed>
ASC0 ASC1 MUX1 MUX2
% ! % !
and the connection
MUX3 Charge Last
! ! ! !
3/17/06