At+Fdt Data Transmission - Siemens Brodersen MC55 AT Command Manual

12.13

AT+FDT Data Transmission

This command requests the ME to transmit a Phase C page. When the ME is ready to accept Phase C data, it
issues the negotiation responses and the CONNECT result code to the application.
In Phase B, the
AT+FDT
to the remote station. In Phase C, the
transmitted before.
Syntax
Exec Command
AT+FDT
Response(s)
CONNECT
Write Command
AT+FDT=<df>, <vr>, <wd>,
Response(s)
CONNECT
Reference(s)
EIA PN-2388
Note
• Used for Fax Class 2 only.
MC55_ATC_V04.00
Confidential / Released
command releases the ME to proceed with negotiation, and releases the DCS message
command resumes transmission after the end of a data stream
AT+FDT
<ln>
Page 315 of 475
PIN ASC0 ASC1 MUX1
! % ! %
MUX2 MUX3 Charge
! ! ! !
Last
!
3/17/06