At+Frs Receive Silence - Siemens Brodersen MC55 AT Command Manual

12.24

AT+FRS Receive Silence

<time>=n causes the TA to report an OK result code to the TE after the specified period of silence was detected
on the line.
The command is aborted if any character is received by the TE. The modem discards the aborting character and
issues an OK result code. An ERROR response code results if this command is issued while the mode is on-
hook.
Syntax
Write Command
AT+FRS=<time>
Response(s)
OK
If error is related to ME functionality:
ERROR
Reference(s)
TIA/EIA-578
Parameter Description
(num)
<time>
Number of 10 millisecond intervals
0...255
Note
• Used for Fax Class 1 only
MC55_ATC_V04.00
Confidential / Released
PIN ASC0 ASC1
! % !
Page 326 of 475
MUX1 MUX2 MUX3 Charge
% ! ! !
Last
! !
3/17/06