At^sise Internet Service Error Report - Siemens Brodersen MC55 AT Command Manual

10.9

AT^SISE Internet Service Error Report

The write command returns the current error status of the specified Internet service profile. If the ser-
AT^SISE
vice profile is not defined or the value is invalid "+CME ERROR" response is returned.
The error status is identical to the content of the "^SIS" URC last issued.
If a service fails the commands
command returns <infoID>=0 it is recommended to use the
GPRS problem might be the reason.
Syntax
Test Command
AT^SISE=?
Response(s)
OK
Write Command
AT^SISE=<srvProfileId>
Response(s)
^SISE: <srvProfileId>, <infoID>[, <info>]
OK
ERROR
+CME ERROR: <err>
Parameter Description
(num)
<srvProfileId>
Internet service profile identifier as defined by
0...9
(num)
<infoID>
Reason for Internet service error. This is a subset of the <urcInfoId>s which can be found in Section 10.10,
Internet Service URC "^SIS".
The value 0 indicates there is no special Internet service error. In this case the application may use
to check for general GSM/GPRS problems.
(str)
<info>
Information text related to <infoID>. This is a subset of the <urcInfoText>s which can be found in Section
10.10, Internet Service URC
Note
• In particular cases, the
services:
FTP: Information 2100
POP3: Warnings
SMTP: Warnings
If an error occurs the information and warning messages are overwritten by error messages.
MC55_ATC_V04.00
Confidential / Released
or
AT^SISR AT^SISW
AT^SISS
"^SIS".
command may deliver information and warnings. This applies the following
AT^SISE
Page 251 of 475
will return an error response. However, if the
command because a general GSM/
AT+CEER
PIN ASC0 ASC1 MUX1
! % % %
<srvProfileId>.
AT^SISE
MUX2 MUX3 Charge
% % ! !
AT+CEER
Last
!
3/17/06