At+Chld Call Hold And Multiparty - Siemens Brodersen MC55 AT Command Manual

At command manual
Table of Contents

Advertisement

9.8

AT+CHLD Call Hold and Multiparty

Syntax
Test Command
AT+CHLD=?
Response(s)
+CHLD: (list of supported <n>s)
OK
Write Command
AT+CHLD=[<n>]
Response(s)
OK
ERROR
+CME ERROR: <err>
Reference(s)
GSM 07.07
Command Description
TA controls the Supplementary Services Call Hold and Multiparty. Calls can be put on hold, recovered, released,
and added to a conversation.
Like for all Supplementary Services, the availability and detailed functionality of Call Hold and Multiparty services
depends on the configuration of the GSM network. The MC55 can only request the service, but the network
decides whether and how the request will be answered.
Parameter Description
(num)
<n>
0
1
1X
2
2X
3
MC55_ATC_V04.00
Confidential / Released
PIN
%
Release all held calls or set User Determined User Busy (UDUB) for a waiting
call:
If a call is waiting, release the waiting call. The calling party will receive a
"BUSY" indication (Supplementary Service User Determined User Busy
"UDUB")
Otherwise, terminate all held calls (if any).
Terminate all active calls (if any) and accept "the other call" as the active call:
If a call is waiting, the waiting call will be accepted.
Otherwise, if a held call is present, the held call becomes active.
Terminate a specific call X (X= 1-7). The call may be active, held or waiting.
The remote party of the terminated call will receive a "NO CARRIER" indica-
tion. Parameter X is the call number
rent calls available with AT command AT+CLCC.
Place all active calls on hold (if any) and accept "the other call" as the active
call:
If a call is waiting, the waiting call will be accepted.
Otherwise, if a held call is present, the held call becomes active.
Place all active calls except call X (X= 1-7) on hold. Parameter X is the call
number
of the targeted call in the list of current calls available with AT
<idx>
command AT+CLCC.
Add a held call to the active calls in order to set up a conference (multiparty)
call.
Page 206 of 475
ASC0 ASC1
MUX1
MUX2
%
%
%
%
of the targeted call in the list of cur-
<idx>
MUX3 Charge
Last
%
!
!
!
3/17/06

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brodersen mc55

Table of Contents