Siemens SINAMICS S120 Equipment Manual page 180

Cabinet Modules
5.6 Motor Modules in chassis format
Configuration
Motor Modules contain the following components as standard:
● Retaining device for the DC busbar, including the interface to the DC connections of the
● The required DC busbar must be obtained separately (options M80 to M87).
● Connection busbar for motor cables for Motor Modules with frame sizes FX and GX; for
● Cable propping bar for the electric power cables
● DRIVE-CLiQ interface (3 DRIVE-CLiQ sockets), without Control Unit
● Customer interface -X55
● 6-pin auxiliary current busbar for 24 V DC supply and fan power supply, including the
● PE busbar (60 x 10 mm), including jumper for looping through to the next Cabinet
● EMC-compliant design thanks to additional shielding measures and appropriate laying of
Note
The configuration examples of the individual Motor Modules are used to illustrate the
positioning of the factory-fitted components. They show the maximum possible configuration
of the modules, which contain all options that can be ordered.
180
Motor Module.
Motor Modules with frame sizes HX and JX, the motor cables are connected directly to
the device.
jumpers for looping through to the next Cabinet Module.
Module.
cables.
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A