4.5.10.3
Cable routing for Basic Line Modules
For the Basic Line Modules, the customer must carry out the following cabling or connection
work:
Table 4- 12
Cable routing
PROFIBUS cables to the CU320 Control Unit
DRIVE-CLiQ connections/signal cables to the CU320 Control Unit
Signal cables to the customer terminal block -X55
Notice:
The "Basic rules for cable routing" and "Preparatory steps" described above must
be observed whenever any cabling or connection work is performed.
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A
Checklist for cabling or connection work for Basic Line Modules
Electrical installation
4.5 Connections
Completed?
79