Lifting The Cabinet Units Off The Transport Pallet And Installing Them - Siemens SINAMICS S120 Equipment Manual

Mechanical installation
3.3 Mechanical installation
3.3.3

Lifting the cabinet units off the transport pallet and installing them

The applicable local guidelines regarding the transportation of the cabinet from the transport
pallet to the installation location must be observed.
A crane transport assembly (option M90) can also be fitted on the top of the cabinet.
The fixing screws on the transport pallet can be removed from the pallet base without having
to raise the cabinet unit. The positions of the fixing screws are indicated by red markings on
the outside of the pallets.
The weight specified on the packaging and the designated center of gravity must always be
taken into account when the cabinet is lifted or transported.
This potential hazard must be taken into account particularly once you have unscrewed the
cabinet units from the transport pallet.
Center of gravity of the cabinet
The diagram below shows the center of gravity of the cabinet (for all sizes), which must
always be taken into account when the cabinet is lifted and installed.
Figure 3-2
Note
A sticker showing the precise specifications regarding the center of gravity of the cabinet is
attached to all cabinets/transport units.
40
WARNING
Center of gravity of the cabinet
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A