Line/Power Connections - Siemens SINAMICS S120 Equipment Manual

4.5.5

Line/power connections

Line Connection Modules
Table 4- 6
Terminals
U1/L1, V1/L2, W1/L3
3 AC power input
Motor Modules in chassis format
Table 4- 7
Terminals
DCP, DCN
DC power input
U2/T1, V2/T2, W2/T3
3 AC power output
Motor Modules in Booksize Cabinet Kit format
Table 4- 8
Terminals
DCP, DCN
DC power input
U2/T1, V2/T2, W2/T3
3 AC power output
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A
Line/power connection of the Line Connection Modules
Technical specifications
Voltage:
380 V AC, 3-phase –10% to 480 V AC, 3-phase +10% (-15% < 1 min)
500 V AC, 3-phase –10% to 690 V AC, 3-phase +10% (-15% < 1 min)
Connecting thread:
M12/50 Nm for ring cable lugs to DIN 46234
DC link/motor connection of the Motor Modules
Technical specifications
Voltage:
510 to 750 V DC
675 to 1035 V DC
Voltage:
0 V 3 AC to 0.72 x DC link voltage
Connection:
M12 / 50 Nm for ring cable lugs to DIN 46234
DC link/motor connection of the Motor Modules
Technical specifications
Voltage:
510 to 750 V DC
Voltage:
0 V 3 AC to 0.72 x DC link voltage
Terminals:
6 - 95 mm (→ see technical data)
2
Electrical installation
4.5 Connections
71