6.4.10.10 Replacing the fan for Booksize Cabinet Kit
Preparatory steps
● Observe the "five safety rules".
● Remove the protective cover.
● Allow unimpeded access.
Removing the fan, width 50 ... 200 mm
Table 6- 2
Removing the fan
1. Disconnect the power supplies (24 V DC and 400 V AC)
Wait 5 minutes while the DC link capacitors discharge!
2. Remove the component from the drive line-up.
3. Open the fan cover
Module width: 50 mm
1. Remove the fan.
2. Remove the connector.
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A
Module width: 100 mm
Maintenance and servicing
6.4 Replacing components
Module width: 150 mm and 200 mm
295