Interfaces - Siemens SINAMICS S120 Equipment Manual

CAUTION
Connecting cables to sensors must always be installed with shielding. The cable shield
must be connected to the ground potential at both ends over a large surface area.
Connecting cables that are routed together with the motor cable must be twisted in pairs
and shielded separately.
8.6.3

Interfaces

Overview
Figure 8-8
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A
8.6 K46, SMC10 Sensor Module Cabinet-Mounted for resolvers
Interface overview for the SMC10
Options
335