Siemens Simatic Ident Function Manual page 114

Setting parameters for blocks
3.6 Transponder addressing
System
Address space of the transponder versions for RF300
System
RF300
114
Addressing
Start address
Length
Addressing
R/W or OTP memory (EEPROM)
(The EEPROM user memory for RF300 can be used either as R/W memory or as an
OTP memory (see RF300 system manual))
Start address
End address
ID-Nr.: (fixed-coded; can only be output as a whole)
Start address
Length
R/W or OTP memory (EEPROM)
(The EEPROM user memory for RF300 can be used either as R/W memory or as an
OTP memory (see RF300 system manual))
Start address
End address
R/W memory (FRAM)
Start address
End address
Id-Nr.: (fixed-coded, can only be read out as a whole)
Start address
Length
32 KB data memory (FRAM/EEPROM)
R/W or OTP memory (EEPROM)
(The EEPROM user memory for RF300 can be used either as R/W memory or as an
OTP memory (see RF300 system manual))
Start address
End address
R/W memory (FRAM)
Start address
End address
ID-Nr.: (fixed-coded; can only be output as a whole)
Start address
Length
64 KB data memory (FRAM/EEPROM)
R/W or OTP memory (EEPROM)
(The EEPROM user memory for RF300 can be used either as R/W memory or as an
OTP memory (see RF300 system manual))
20 bytes of data memory (EEPROM)
8 KB data memory (FRAM/EEPROM)
Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04
16-bit hexadecimal number
0xFFF0
0x0008
16-bit hexadecimal number
0xFF00
0xFF13
0xFFF0
0x0008
0xFF00
0xFF13
0x0000
0x1FFC
0xFFF0
0x0008
0xFF00
0xFF13
0x0000
0x7FFC
0xFFF0
0x0008