Siemens Simatic Ident Function Manual page 34

Setting parameters for blocks
3.4 Programming Ident blocks
Parameter
NUMBER_TAGS
LEN_DATA
Event display
The following data types are not displayed in the TIA Portal for a newly created project in the
selection list of the data types. To be able to use these data types, you must manually enter
the name of the data type (e.g. "IID_IN_I_81"). After the first use, the data type is
automatically listed in the project and also in the selection list.
Results for MOBY U
Table 3- 12 ATTRIBUTE "0x00" (data type "IID_INVENT_00_MOBY_U")
Name
number MDS
UID length
UID
UID[1]
UID
UID[1]
UID[2]
UID[3]
UID[4]
UID[5]
UID[6]
UID[7]
UID[8]
UID[2]
UID[3]
UID[4]
UID[5]
UID[6]
UID[7]
UID[8]
UID[9]
UID[10]
UID[11]
UID[12]
34
Data type
Int
Word
Type Comment
WORD Number of MDS
WORD length of UID
ARRAY[1..12] of
IID IN I 8BYTE
IID_IN_I_8BYTE
ARRAY[1..8] of BYTE
BYTE
BYTE
BYTE
BYTE
BYTE
BYTE
BYTE
BYTE
"IID_IN_I_8BYTE"
"IID_IN_I_8BYTE"
"IID_IN_I_8BYTE"
"IID_IN_I_8BYTE"
"IID_IN_I_8BYTE"
"IID_IN_I_8BYTE"
"IID_IN_I_8BYTE"
"IID_IN_I_8BYTE"
"IID_IN_I_8BYTE"
"IID_IN_I_8BYTE"
"IID_IN_I_8BYTE"
Default values Description
0 Number of transponders in the anten-
na field
W#16#0 Length of the valid data
During command processing = 0
Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04