Siemens Simatic Ident Function Manual page 61

Name
expert mode
status_ant
scanning_time_SLG
MDS control
blink pattern
act algor Single Tag
act algor ITF Phase2
act algor ITF Phase1
act algor Smoothing
act algor Blacklist
act algor RSSI Threshold
act algor Power Ramp
act algor Power Gap
Reserved1
Reserved2
Reserved3
Reserved4
act algor EPC MemBankFilter
act algor Tag Holg
act algor Multi Tag
act algor ISTM
reserved word2
reserved word3
reserved word4
filtered max rssi
reserved byte2
filtered tags rssi
reserved byte3
filtered tags black list
filtered tags epc data
filtered tags smoothing
itf ph1 max detect
itf ph1 tags detect
itf ph2 max detect
itf ph2 tags detect
filtered_istm_min_dist
filtered istm tags
last error
reserved byte4
error command1
error command2
error command3
reserved word5
reserved_array_byte
Table 3- 42 ATTRIBUTE "0x89" (data type "IID_READSTAT_89_RF68xR") compatible with RF61xR/RF68xR
Name
status info
hardware version
firmware_version
config ID
inventory_status
sum of filtered tags
filtered smoothing
filtered blacklist
Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04
Type Comment
BYTE Expert mode
BYTE
Status of antenna
BYTE Radio communication profile (country specific radio
standart)
BYTE Presence mode
BYTE Blink Pattern
Bool Single Tag [1]
Bool ITF Phase2 [2]
Bool ITF Phase1 [3]
Bool Smoothing [4]
Bool Blacklist [5]
Bool RSSI Threshold [6]
Bool Power Ramp [7]
Bool Power Gap [8]
Bool Reserved1 [1]
Bool Reserved2 [2]
Bool Reserved3 [3]
Bool Reserved4 [4]
Bool EPC MemBankFilteres [5]
Bool Tag Hold [6]
Bool Multi Tag [7]
Bool ISTM [8]
WORD Reserved
WORD Reserved
WORD Reserved
BYTE Maximum RSSI value of a tag, of all filtered tags
BYTE Reserved
BYTE Number of tags, filtered out by the RSSI threshold
BYTE Reserved
WORD Number of tags, filtered out via Black-List
WORD Number of tags, filtered out via EPC Data Filter
WORD Number of tags in Tag List of status Not-Observed
WORD Number of reads of a Tag, filtered out via ITF-phase 1
WORD Number of tags, filtered out via ITF-phase 1
WORD Number of reads of a Tag, filtered out via ITF-phase 2
WORD Number of tags, filtered out via ITF-phase 2
WORD Minimum distance of tags according to sorting criterion
of ISTM
WORD Number of tags, filtered out via ISTM algorithm
BYTE error code of the last occuring error (last command)
BYTE Reserved
WORD Last command (has lead to error code) "last error"
WORD Last command (has lead to error code) "last error"
WORD Last command (has lead to error code) "last error"
WORD Reserved
ARRAY[1..30]
of Byte
Type Comment
BYTE SLG status mode(Subcommand)
BYTE Version of hardware
ARRAY[1..4] of Version of firmware
CHAR
DWORD Unix timestamp
WORD 0=inventory not active; 1=inventory active; 2=presence
mode active
WORD All filtered Tags
WORD Filtered Tags trough Smoothing
WORD Filtered Tags trough Blacklist
Setting parameters for blocks
3.4 Programming Ident blocks
2)
61