Siemens Simatic Ident Function Manual page 38

Setting parameters for blocks
3.4 Programming Ident blocks
Name
EPC[5]
EPC[6]
EPC[7]
EPC[8]
EPC[9]
EPC[10]
EPC[11]
EPC[12]
ID[2]
ID[3]
ID[4]
ID[5]
ID[6]
ID[7]
ID[8]
ID[9]
ID[10]
ID[11]
Note
Number of IDs transferred
"number_MDS" specifies the number of IDs (1 to 11; handle IDs and EPC IDs) transferred
with the "INVENTORY" block. To receive the IDs of all transponders located in the antenna
field, it may be necessary to run the "INVENTORY" block again with ATTRIBUTE "0x82".
You will find more detailed information on the individual status modes in the manuals
matching the modes "FB 45", "FB55" and "SIMATIC RF620R/RF630R".
The identifiers of the status modes correspond to the following identifiers in the other
manuals:
0x82
0x83
0x85
0x90
0x91
0x92
38
Type Comment
BYTE
BYTE
BYTE
BYTE
BYTE
BYTE
BYTE
BYTE
"IID_IN_I_20Byte"
"IID_IN_I_20Byte"
"IID_IN_I_20Byte"
"IID_IN_I_20Byte"
"IID_IN_I_20Byte"
"IID_IN_I_20Byte"
"IID_IN_I_20Byte"
"IID_IN_I_20Byte"
"IID_IN_I_20Byte"
"IID_IN_I_20Byte"
≙ 0x02
≙ 0x03
≙ 0x05
≙ 0x10
≙ 0x11
≙ 0x12
Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04