Siemens Simatic Ident Function Manual page 83

Table 3- 58
Parameter
CMD
OFFSETBUFFER
ATTRIBUTES
RXREF
Table 3- 59
Parameter
CMD
OFFSETBUFFER
ATTRIBUTES
EPCID_UID
LEN_ID
RXREF
SLG D10S only
1)
Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04
READER-STATUS
Value / description
0x74
Offset in the "RXREF" receive buffer
Identifier of the status modes / possible entries:
RF200: 0x81
•
RF300: 0x81, 0x86
•
RF620R, RF630R: 0x87, 0x88, 0xA0, 0xA1
•
RF61xR, RF68xR: 0x89
•
RF185C, RF186C, RF188C: 0xA2
•
MOBY U: 0x81, 0x84, 0x85
•
MOBY D: 0x81
•
Received status data
You will find the data structure of the status modes in the section
"Reader_Status (Page 58)".
TAG-STATUS
Value / description
0x73
Offset in the "RXREF" receive buffer
Identifier of the status modes / possible entries:
RF200: 0x83
•
RF300 (RF300T): 0x04, 0x82
•
RF300 (ISO): 0x83
•
RF300 Gen2: 0x83
•
RF600 (R620R, RF630R): 0x84, 0x85
•
MOBY D: 0x83
•
MOBY U: 80
•
Buffer for up to 62 bytes EPC-ID, 8 bytes UID or 4 bytes handle ID.
2 - 62-byte EPC-ID is entered at the start of the buffer (length is
•
set by "LEN_ID")
8-byte UID is entered at the start of the buffer ("LEN_ID = 8")
•
4-byte handle ID must be entered in the array element [5]-[8]
•
("LEN_ID = 8")
Default value: 0x00 ≙ unspecified single tag access
Length of the EPC-ID/UID
Received status data
You will find the data structure of the status modes in the section
"Tag_Status (Page 64)".
Setting parameters for blocks
3.5 Programming the Ident profile
1)
83