Siemens Simatic Ident Function Manual page 123

Error mes- Description
sage
(hex)
0xE1FE0400 Only during initialization: Transponder is unable to execute the initialization command
Transponder is defective
•
0xE1FE0600 Error in transponder memory
The transponder has never been written to or has lost the contents of its memory due to battery failure.
Replace transponder (if battery bit is set)
•
Re-initialize transponder
•
0xE1FE0700 Password error
RF620R/RF630R: Incorrect password
0xE1FE0800 The transponder in the antenna field does not have the expected UID or has no UID.
0xE1FE0A00 The transponder is read/write-protected.
0xE1FE8100 The transponder is not responding.
0xE1FE8200 The transponder password is incorrect. Access is denied.
0xE1FE8300 The verification of the written transponder data has failed.
0xE1FE8400 General transponder error
0xE1FE8500 The transponder has too little power to execute the command.
Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04
4.3 Errors from the communications module/reader
Error messages
123