Suzuki SY413 Service Manual page 2150

1. Counter drive gear assembly
1. Manual valve lever shaft 3. Slotted spring pin
subassembly 4. Manual valve lever
2. Spacer
50) Clamp special tool in a vise and place transmission housing
onto special tool above.
Special Tool
(A): 09927-76040
51) Measure transmission housing rotational torque using push-
pull gauge or the like.
Specified value:
0.05 – 0.15 N·m (0.005 – 0.015 kg-m, 0.037 – 0.108 lb-ft)
1. Vise
52) Remove snap ring.
53) Press counter drive gear subassembly using special tool.
Special Tool
(B): 09925-86010
54) Remove slotted spring pin using pin punch or the like.
NOTE:
Never reuse removed spacer and slotted spring pin.
55) Remove manual valve lever shaft subassembly, lever manual
valve and oil seal.
NOTE:
Never reuse removed oil seal.
AUTOMATIC TRANSMISSION 7B1-97