Suzuki SY413 Service Manual page 1883

7A1-16 MANUAL TRANSMISSION (J18 ENGINE MODEL)
1. Side bearing retainer
2. Bearing outer race
ASSEMBLING UNIT
DIFFERENTIAL TO LEFT CASE
1) Install differential assembly into right case.
2) Measure clearance "A" (between differential side face and side
bearing outer race) and "B" (bearing retainer).
3) Select the shim referring to the following table.
Clearance
A – B (mm)
0.496 – 0.515
0.516 – 0.545
0.546 – 0.575
0.576 – 0.605
0.606 – 0.635
0.636 – 0.665
0.666 – 0.695
0.696 – 0.725
0.726 – 0.755
0.756 – 0.785
0.786 – 0.815
0.816 – 0.845
0.846 – 0.875
0.876 – 0.905
0.906 – 0.935
0.936 – 0.965
0.966 – 0.995
0.996 – 1.025
1.026 – 1.055
1.056 – 1.085
1.086 – 1.115
1.116 – 1.145
1.146 – 1.175
1.176 – 1.205
1.206 – 1.236
Available shim
thickness
Thickness of bearing
shim to be installed (mm)
0.60
0.63
0.66
0.69
0.72
0.75
0.78
0.81
0.84
0.87
0.90
0.93
0.96
0.99
1.02
1.05
1.08
1.11
1.14
1.17
1.20
1.23
1.26
1.29
1.32
0.3, 0.6, 0.63, 0.66, 0.69,
0.72, 0.75, 0.78, 0.81,
0.84, and 0.87 mm
0.011, 0.023, 0.024, 0.025,
0.027, 0.028, 0.029, 0.030,
0.031, 0.033 and 0.034 in