Suzuki SY413 Service Manual page 1430

1A-14 HEATER AND VENTILATION
HEATER CONTROL CABLES
1. Heater unit
2. Blower fan motor unit
3. Fresh air control cable
4. Air control cable
5. Heater control lever assembly
REMOVAL
1) Remove control lever assembly. Refer to "HEATER CONTROL
LEVER ASSEMBLY" in this section.
2) Remove heater control cables from control lever assembly.
INSTALLATION
Reverse removal procedure for installation, and then noting the fol-
lowing instructions.
D Heater Control (HOT-COOL Selector) Cable
– Move control lever to "HOT" ("COOL" for RH vehicle) position
as full as possible.
– Push lever fully in arrow direction to fix cable in position, as
shown.