Suzuki SY413 Service Manual page 1562

1. Junction/fuse block
1. Junction/fuse block
1. Steering joint lower cover
2. Steering joint upper cover
1. Interlock cable
2. Screw (If equipped)
8) Disconnect three connectors for contact coil and combination
9) Disconnect three connectors for ignition switch wire harness
10) Remove steering joint upper cover.
11) Remove steering shaft upper joint bolt.
3. Steering shaft upper
joint bolt
12) Remove steering column mounting nuts (4 pcs).
13) If equipped with shift (key) interlock cable, remove shift (key)
AIR BAG STEERING WHEEL AND COLUMN 3C1-15
switch assembly wire harness from junction/fuse block.
from junction/fuse block.
interlock cable screw and then disconnect its cable from igni-
tion switch with ignition switch turned at "ACC" position.
After disconnecting, turn ignition switch to "LOCK" position.