Suzuki SY413 Service Manual page 1492

REMOVE AND INSTALL PINION BEARING
REMOVAL
1) Remove rack from steering gear case, referring to STEERING
RACK REMOVAL of this section.
2) Pull out pinion bearing from gear case with special tools (A)and
(B) as shown.
Special Tools
(A): 09921-20200
(B): 09930-30104
1. Pinion bearing
INSTALLATION
1) Apply grease to rollers of pinion bearing.
2) Press-fit pinion bearing into gear case with special tool (C) as
shown.
After press-fitting, make sure that bearing rollers are in- stalled
properly.
Special Tool
(C): 09943-88211
1. Pinion bearing
3) Follow Steps 1) to 5) in STEERING RACK INSTALLATION of
this section to complete installation.
MANUAL RACK AND PINION 3B-11