Suzuki SY413 Service Manual page 1574

3D-6 FRONT SUSPENSION
INSTALLATION
1) Install strut assembly by reversing REMOVAL Steps 1) – 7).
Insert bolts in such a direction as shown.
2) Torque all fasteners to specification.
Tightening Torque
(a): 28 N·m (2.8 kg-m, 20.5 lb-ft)
(b): 90 N·m (9.0 kg-m, 65.0 lb-ft)
NOTE:
Don't twist brake hose when installing it.
Install E ring as far as it fits to bracket as shown.
3) Confirm front end (wheel) alignment referring to Section 3A.