Suzuki SY413 Service Manual page 2177

7B1-124 AUTOMATIC TRANSMISSION
1. Sun gear input flange
1. Thrust needle roller bearing
15) Install input shaft to reverse clutch drum.
16) Install sun gear input flange with retainer ring.
17) Coat thrust washer with grease.
Grease: 99000-25030 (SUZUKI SUPER GREASE C)
18) Install thrust washer to reverse clutch assembly.
2. Thrust washer
3. Retainer ring
19) Coat race with thrust needle roller bearing with grease.
Grease: 99000-25030 (SUZUKI SUPER GREASE C)
20) Install thrust needle roller bearing to reverse clutch assembly.
Race with bearing dimension
Outside diameter : 32.9 mm (1.30 in.)
Inside diameter
Thickness
: 18.8 mm (0.74 in.)
: 3.6 mm (0.14 in.)