Suzuki SY413 Service Manual page 2169

7B1-116 AUTOMATIC TRANSMISSION
7) Apply A/T fluid to thrust bearing race and install it.
1. Thrust bearing race
8) Apply A/T fluid to thrust washer and install it.
1. Thrust washer
9) Set one-way clutch and one-way clutch inner race.
NOTE:
D Check to make sure that "A" section (shorter than rear)
D Check to make sure that thinner section "B" of one-way
10) Install No.1 (F1) one-way clutch with snap ring.
1. No.1 (F1) one-way
clutch
2. Snap ring
11) Install thrust needle roller bearing.
1. Thrust needle
roller bearing
of inner race faces toward front side.
clutch faces toward rear side.