Considerations Before Installation; Assumptions; Application Credits - ABB X Series G5 Startup Manual

Flow computers and remote controllers
Hide thumbs Also See for X Series G5:
Table of Contents

Advertisement

Considerations before installation

Versions of PCCU32 older than version 7.61 are not compatible. The
installation of these meters, senior fitting, tap valves, or other peripheral
equipment is outside the scope of this document.

Assumptions

The following is assumed:
The XFC and XRC are designed to adapt to different site scenarios. This
guide covers a standard single-tube configuration for the XFC flow
computer for a common site scenario which requires:
 Mounting kit
 Resistance temperature detector (RTD)
 Solar panel charger and mounting kit
If the standard configuration differs from the specific site needs, and is not
addressed in this guide, see the user manuals listed in
Additional
information.
This guide assumes an orifice plate as the meter element. The XFC and XRC
support other meter types.
For XRC illustrations, see the user manual listed in
Additional
information.

Application credits

Standard Credits - The XFC and XRC contain many standard applications
that are available at no extra cost.
General Credits - 4 general credits come with the device. These can be
used to enable any of the general applications.
Explicit credits - There are 2 explicit applications available that must be
purchased separately:
 NIST 14 or CO2
 IEC application
2 1 0 60 01M NAA | XSER IE S G5 S TART UP G UI DE | 9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xfc g5Xrc g5

Table of Contents