Figure 3-14 Gpz-Bs11 Expansion Bay In Expansion Chassis; Figure 3-15 Open Expansion Chassis Cover - NEC Univerge SV9100 System Hardware Manual

3-14
Do not remove or install this blade with the power
on.
WARNING
1. Ensure the chassis is powered down.
2. Locate the door positioned on the left end (expansion bay)
of the Expansion Chassis.

Figure 3-14 GPZ-BS11 Expansion Bay in Expansion Chassis

3. From the left side of the chassis, pull cover outward to
expose the expansion bay (refer to
Expansion Chassis Cover on page

Figure 3-15 Open Expansion Chassis Cover

4. Pull the cover toward you to remove.

Cover must be removed to install GPZ-BS11 blade.
Issue 2.0
Expansion Bay
Figure 3-15 Open
3-14).
Installing the SV9100 Chassis