Section 11 Telephone Adapters; 11.1 Using Adapters; In-Line Power Adapter (Ilpa-R); Figure 7-19 Installing Adapters - NEC Univerge SV9100 System Hardware Manual

S 11 T
ECTION ELEPHONE

11.1 Using Adapters

11.2 In-line Power Adapter (ILPA-R)

7-26
A
DAPTERS
The modular terminals can support installing one additional adapter underneath
the terminal. These adapters provide the multiline terminal different abilities,
depending on the adapter installed.

Figure 7-19 Installing Adapters

These optional adapters are not installed on non-modular telephones.

Only the ILPA, ADA and PSA Adapters can be used on the IP phones.

ADA – Conversation Recording

APR – Analog Port Adapter with Ringer

PSA – Multiline Terminal /IP Phone Power Failure

Before installing or removing the adapter, the multiline terminal
should be unplugged from the system. External power is not required
for the adapter.
CAUTION
Telephones with any adapter installed require an optional wall mount unit (WM-L)
to be wall mounted. The bracket does not accommodate the adapter(s).
The In-Line Power Adapter (ILPA-R), which is IEEE 802.3af compliant, detects
power from a PoE-compatible Ethernet switch and passes it to the IP terminal.
The ILPA does the negotiation and detection with the switch and then relays the
power to the IP terminal device. This provides an additional way to power the
NEC IP terminals. With this adapter, the IP terminals on the UNIVERGE SV9100
system can be powered using:
Local power connecting the IP terminal to a local AC wall outlet using the

AC-R Adapter
NEC power supply PoE-managed switch (BlueFire 200/24) (in-line and

spare pair detection)
Installing SV9100 Optional Equipment
Issue 2.0