Installing The 8Lk-L Unit; Figure 5-80 8Lk-L Unit; Figure 5-81 Remove Side Panel From Multiline Terminal - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
SV9100 System Hardware Manual
Supports Red and Green LED colors


Figure 5-80 8LK-L UNIT

5.2.1.1

Installing the 8LK-L UNIT

WARNING
1. Remove both plastic panels from the front of the multiline
terminal.
2. Turn multiline terminal upside down.

3. Pry the side panel from the multiline terminal.

Figure 5-81 Remove Side Panel from Multiline Terminal

Side Panel
4. Return the multiline terminal to the buttons side up position.
5. Fit the projections on the side of the 8LK-L UNIT into the
guide holes on the side of the multiline terminal.
To prevent possible damage to the 8LK-L UNIT
or the DT Series multiline terminal during
installation or removal, disconnect the line
cord/LAN cable and the AC/DC adapter from the
DT Series multiline terminal.
Only one 8LK-L UNIT can be attached to the DT Series
multiline terminal.
5-81