NEC Univerge SV9100 System Hardware Manual page 255

Issue 2.0
SV9100 System Hardware Manual
GPZ-BS10/GPZ-BS11 Interface Circuit

Main Processing 32-Bit CPU Circuit (P1015 @ 533 MHz)

Time Switch, Optional Blade Control Circuit

Backboard Interface Circuit

The GCD-CP10 provides:
400 trunk ports maximum

896 extension ports maximum

896 ports digital/IP extensions maximum

368 analog ports maximum

512 virtual extensions

Connection for GPZ-IPLE Daughter Board

Supports TAPI 2.x

One Green Status LED

Four Red Status LEDs

Five diagnostic LEDs which indicate the status of various system

functions
During normal operation, the RUN LED is flashing and the remaining

LEDs are off
Time Division Multiplex Switch (TDM Switch)

Digital Phase Locked Loop (DPLL)

Tone Generator

Tone Processing DSP

Connection for Memory Module

Digital Signal Processor (DSP)

DTMF Tone Sender

DTMF Tone Receiver

Dial Tone Generator (DTG)

The GPZ-BS10 provides 64 channels for Telephony Resource (e.g.,

DTMF Receiver, Caller ID Receiver, and Call Progress Tone
Detection)
System Tone Sender

MF Receiver

MF Sender

MFC Tone Sender

4-17