Figure 3-32 Connecting The Base And Expansion Chassis; Figure 3-33 Securing The Expansion Chassis To The Expansion Bracket; Figure 3-34 Install Expansion Chassis Cover - NEC Univerge SV9100 System Hardware Manual

Issue 2.0

Figure 3-32 Connecting the Base and Expansion Chassis

Figure 3-33 Securing the Expansion Chassis to the Expansion Bracket

SV9100 System Hardware Manual
5. Align the Backboard Connector on the Expansion and Base chassis
(refer to Figure 3-32 Connecting the Base and Expansion
and push the two chassis together.
6. Secure the Base and Expansion chassis using four screws in holes D
and E on the top (refer to
Chassis to the Expansion
7. Slide the Expansion Chassis cover into place. Using two screws in
holes d and e (refer to
on page 3-28) secure the Expansion Chassis cover.
Figure 3-33 Securing the Expansion
Bracket), and holes F and G on the bottom.

Figure 3-34 Install Expansion Chassis Cover

Chassis),
3-27