NEC Univerge SV9100 System Hardware Manual page 307

Hide thumbs Also See for Univerge SV9100:

Table of Contents

SV9100 System Hardware Manual

Basic PRI Call Control (BCC)

Display of incoming caller's name and number (when allowed by the

Speech and 3.1 KHz audio

When installed, GCD-PRTA uses the first block of 30 consecutive trunk

ports. For example, if a COIU blade is installed for trunks 1~8, the

GCD-PRTA automatically uses trunks 9~32. If the COIU blades are

installed for trunks 1~8 and 17~24, GCD-PRTA uses trunks 25~56. The

GCD-PRTA cannot use trunks 9~16 (even if available) since they are not

part of a consecutive block of 32 trunks. Each GCD-PRTA requires 32 ports

in the system, even if not all the ports are used, otherwise the blade does

not function.

The GCD-PRTA requires one universal slot.

Refer to the following tables for maximum upgrade capacities of the

GCD-PRTA blade:

Table 2-6 SV9100 Maximum 9.5" Gateway and 19" System

Capacities – Blades on page 2-12

Table 2-7 SV9100 Maximum 9.5" Base and Expansion System

Capacities – Blades on page 2-14